Site map

Fencing Solutions - Applications

The Join-T-Lock system is ideally suited to all commercial fencing applications.

Historically, fencing of this type has been connected using either traditional galvanized bolts or loose pin dowels. Both systems can result in any or all of the following:

• Corroded exposed bolt heads & nail heads

• Loose connections

• Free rotating members and corroded nail heads.

Clearly these systems may represent a future safety and liability hazard for the owner and/or community . A Join-T-Lock fence has tight fitting connections free of exposed unprotected steel work. Every connection uses an epoxy set dowel as recognized in SAA HB108 – 1988 - The Timber Design Handbook. The machining accuracy of Join-T-Lock fabrication allows for flawless changes of direction in a neat in-plane jointing system.

04138 - Woolooware Bay Foreshore Development - Single stainless wire fence stretching over 500m to keep trail bikers out of protected mangrove areas

04-132 - Lilli Pilli Reserve - Bollard and chain mixed with low fence single rail to give aesthetic appearance.

04-145 - Port Hacking Road - Miranda - Bollards staggered at 1.2m centers to stop vehicles illegally parking 

Styles