JOIN-T-LOCK PTY LTD

 

  Site map

Fencing Solutions
  The System

Fencing Solutions - Product Specification

 

All Join-T-Lock fences are fabricated using H4 ACQ treated renewable Slash Pine timber true round logs. ACQ treatment is an approved preservative treatment under AS1604 without the environmentally damaging arsenic and chromium preservatives. It represents the next generation in treated timber.

All applicable structural sections are classified under AS1720 as follows:

  • Strength group S5

  • Joint Group J3

  • Density 850 kg/m3

All Join-T-Lock connections use either galvanized steel dowels conforming to AS1302 or 316 stainless steel dowels if located in a marine environment. Resin injection is performed using a two-component waterproof epoxy adhesive.

All pole sections receive 2 coats of Intergrain Natural Stain / Dimension 4 – a water based multi purpose exterior timber treatment system that protects against staining, sun deteriation and damage, water and fungal damage and provides stabilisation of the timber.

 

.

Projects in focus

04138 - Woolooware Bay Foreshore Development - Single stainless wire fence stretching over 500m to keep trail bikers out of protected mangrove areas

04-132 - Lilli Pilli Reserve - Bollard and chain mixed with low fence single rail o give good aesthetic appearance.

04-145 - Port Hacking Road - Miranda - Bollards staggered at 1.2m centers to stop vehicles illegally parking 

  Product Information
  Installation Procedures
  Maintenance

Styles

Parkland Products
Material Data Sheets
Technical Drawings
Photo Gallery
About Us
Contact Us
Copyright Join-T-Lock Pty Ltd  Terms Of Use