Site map


Fencing Solutions




The System


Fencing Solutions - Balustrade Type A


Technical Data

The Type A -Balustraded fence is suitable for all applications covered by both the BCA and AS 2156.2 Track Class 1 5 Installations. It may be supplied with either Galvanised or 316 Stainless dowels to suite more severe coastal installations.

Posts are supplied with a standard 600mm in ground embedment depth to suite concrete footings. Should a variation be required please advise. All concrete is graded N20 at 28 days. All grout is Class C cementitious high early strength non shrink grout. Resin for anchoring to rock is any suitable two component epoxy to Australian Standards.



The best protection available in the commercial fencing range, the Type A represents an appropriate, attractive and durable installation for all areas where any of the following hazards exist:

         High falls

         Water Hazards

         Regular use by small children

         A myriad of other possible applications

Talk to our Tech support for more info on where to obtain information on hazard identification.  


Download a PDF version of Type A


Project in focus

04138 - Woolooware Bay Foreshore Development - Single stainless wire fence stretching over 500m to keep trail bikers out of protected mangrove areas

04-132 - Lilli Pilli Reserve - Bollard and chain mixed with low fence single rail to give aesthetic appearance.

04-145 - Port Hacking Road - Miranda - Bollards staggered at 1.2m centers to stop vehicles illegally parking 


Product Information



Installation Procedures








Parkland Products


Material Data Sheets


Technical Drawings


Photo Gallery


About Us


Contact Us























Copyright Join-T-Lock Pty Ltd  Terms Of Use