JOIN-T-LOCK PTY LTD

 

  Site map

Fencing Solutions
Parkland Products

Parkland Products - Car Park T Rails

 

Technical Data

The Car Park T Rail module is designed for use as a visual barrier around the perimeter of car parking areas. Usually installed in sets with walking space between each. All timber is H4 CCA treated Slash Pine. It may be supplied with either galvanized or 316 stainless steel dowels to suit more severe coastal installations.

Posts are supplied with a standard 600mm in ground embedment depth to suit concrete footings. Should a variation be required please advise. Available in a range of coating finishes. Rail ends can be chamfered if required.

Availability

Please check the table below for available lengths and diameters

Post & Rail Diameters Rail Lengths
100mm 2.1, 2.4m
125mm 2.1, 2.4, 2.7m
150mm 2.1, 2.4, 2.7, 3.0m
200mm 2.1, 2.4, 2.7, 3.0, 3.6m

The Car Park T Rail can be shipped either as an assembled unit or in knock down form as a kit to more remote locations.

Download a PDF version of car park t rails

Project in focus

04138 - Woolooware Bay Foreshore Development - Single stainless wire fence stretching over 500m to keep trail bikers out of protected mangrove areas

04-132 - Lilli Pilli Reserve - Bollard and chain mixed with low single rail fenceto give aesthetic appearance 

04-145 - Port Hacking Road - Miranda - Bollards staggered at 1.2m centers to stop vehicles illegally parking 

  The System
  Product Information
  Bollards
Cable Gates & Fences
Car Park T Rails
Multiple Rail Fences
Path Maker Fence System
Sleeper Seats
Dune Retainer Fences
Tree Guards
Bridge Crossings
Signs
Material Data Sheets
Technical Drawings

Photo Gallery

About Us
Contact Us
     
Copyright Join-T-Lock Pty Ltd  Terms Of Use